1` How To Do Lock Installation - A Complete Guide

Installing locks is an important part of securing your home, office, or business. Whether you are looking to add extra security to your doorways, prevent unauthorized access or simply make sure that the right people have access, lock installation is a simple and affordable way to do so.

This guide will provide all the information you need to know about how to install locks, including what tools are necessary and which type of locks are best for different scenarios.

We will also cover some common mistakes made by DIY enthusiasts and offer tips on choosing the right lock for your needs. By following these steps, you will be able to successfully install new locks in no time!

Once you have gathered the necessary tools and materials, it’s time to begin the installation. First, measure the doorframe or jamb where you plan to install your locks. This will ensure that the lock fits correctly and securely in place.

Next, use a drill bit according to the manufacturer’s instructions for drilling into wood or metal doors depending on your material type. A hole saw may also be needed for certain types of locks such as deadbolts or padlocks. After drilling, insert your chosen locks into the prepared holes and secure them with screws if needed.

Finally, test each lock before fully installing them to make sure they are working properly and no adjustments need to be made. Be sure to remember the combination or code for your lock if applicable. With these steps in mind, you are now ready to install locks on your own!

By following the steps outlined here, you can easily and safely install new locks in no time. With a little knowledge and patience, you can have secure doors with the right type of locks for any situation. Your family, business, or office will be much safer as a result.

When you move into a new home, one of the first things you need to do is install locks on all the doors. But how do you go about doing that? 

It can be difficult to know how to install locks on your doors. There are so many different types of locks available on the market, and each one requires a different installation process.

Houston Locksmith Pros has created an easy-to-follow guide on how to install locks on your door. This guide covers everything from the basics of lock installation to more advanced techniques.

FAQs About Lock Installation

What is a lock installation?

A lock installation is a process of installing a locking device, such as a keyed door knob or deadbolt, on a door or window. It is an important step in securing your home and protecting your family and property.

Lock installations should always be performed by experienced professionals to ensure that the job is done correctly and securely. A good installation will also help prevent accidental lockouts and break-ins.

In addition to locks, locksmiths may also install other security devices such as alarm systems, security cameras, access control systems, and more. With professional lock installation services, you can rest assured that your home or business is properly secure.

What are the benefits of a lock installation?

Having a lock installed in your home or business will provide improved security and peace of mind. A good quality lock can help to deter potential intruders from entering your property and protect your possessions from theft. It also provides an additional layer of protection for those living inside the property, helping to ensure their personal safety. Additionally, having a lock installed can reduce insurance premiums as it shows that you have taken extra measures to secure your property. Finally, locks are relatively simple to install and maintain which makes them an affordable option for added security.

How do I choose a lock installation company?

When it comes to choosing a lock installation company, there are many factors to consider. You want to make sure that the locksmith you choose has the necessary experience and qualifications for your particular project.

It’s important to ask questions like: How long have they been in business? Do they have any certifications or licenses? Have they completed any similar projects in the past?

Houston Locksmith Pros is an excellent choice when it comes to lock installation. We have over 10 years of experience and are certified by the Master Locksmiths Association (MLA).

Our team has extensive knowledge and experience working on all types of locks, from residential deadbolts to commercial-grade access control systems. We have a wide range of services, including installation, repair, and maintenance.

Our team will work with you to understand your security needs and provide a customized solution for your home or business. We also stand behind our work with a 100% satisfaction guarantee.

When choosing any lock installation company, make sure to do some research first. Ask questions and read reviews so that you can be confident in the quality of service you’re receiving. With Houston Locksmith Pros, you can trust us to provide quality workmanship on all of our projects.

Types Of Locks installation

There are several different types of locks that can be installed on a door. The most common type is door hardware installation, which involves installing a door hole in the door frame and then attaching door hardware to the door.

This type of installation is typically used for doors that are not 9 feet wide. For doors that are 9 feet wide, the door hardware installation is not recommended. Another type of lock that can be installed on a door is the door jamb lock.

This type of lock is installed on the door jamb and is used to secure the door in place. The door jamb lock is not recommended for doors that are taller than 6 feet.

Finally, the deadbolt lock is another type of lock that can be installed on a door. This type of lock is installed on the door jamb and is used to secure the door in place. The deadbolt lock is not recommended for doors that are shorter than 6 feet.

How To Pick A Lock

First, you’ll need to identify the type of lock you’re dealing with. The most common types are mounting plate locks, old strike plate locks, and center hole locks. Once you know what kind of lock you’re dealing with, you can start to figure out the best way to pick it.

For mounting plate locks, the best way to pick them is by using a tension wrench and a nail file. Insert the tension wrench into the keyhole and apply pressure while turning it clockwise.

At the same time, use the nail file to rake through the pins in the lock, working from top to bottom. Once all the pins are set, turn the wrench counterclockwise and the lock should open.

For old strike plate locks, the best way to pick them is by using a paperclip or bobby pin. Insert the paperclip or bobby pin into the keyhole and push up on the locking mechanism until it pops open.

Finally, for center hole locks, you’ll need a small screwdriver or toothpick. Insert the screwdriver or toothpick into the keyhole and push up on the locking mechanism until it pops open. With a little patience and some practice, you should be able to pick any type of lock!

How Installing A New Lock

Most people don’t give much thought to their door locks until they need to replace them. Whether you’re installing a new lock for the first time or replacing an old one, the process is fairly straightforward.

Here’s a step-by-step guide to installing a new door lock:

1. Start by removing the old door knob or handle. You’ll need to unscrew the screws that hold it in place, and then gently pull it away from the door.

2. Next, take a look at the door edge where the new lock will be installed. If there are no screw holes, you’ll need to drill some before proceeding.

3. Once the screw holes are in place, line up the new door knob or handle with the holes and insert the screws. Firmly tighten them in place.

4. The last step is to test the new lock to make sure it works properly. Insert the key and turn it to engage the locking mechanism. Then try opening and closing the door to make sure everything is working smoothly.

Installing a new door lock is a relatively easy process that anyone can do with just a few basic tools. By taking a few minutes to replace your old lock, you can help improve your home security and peace of mind.

Tips And Tricks For Lock Installation

The front door is the most common point of entry for burglars. As such, it’s important to make sure that your front door is properly secured.

One way to do this is to install a new deadbolt. Deadbolts are more secure than traditional locks, and they can help deter would-be burglars. However, installing a new deadbolt can be tricky.

Here are a few tips and tricks to help you install your new deadbolt:

1. Start by identifying the front door of your home. In most cases, the front door will be the heaviest and most solidly constructed door in your home.

2. Take a look at your existing deadbolt. If you already have a deadbolt installed, you may be able to simply replace the existing device with your new one. However, if your existing lock is not a deadbolt, you’ll need to drill a new hole in order to install the new device.

3. Once you’ve identified the front door and located the appropriate drill hole, it’s time to start the installation. Begin by inserting the new deadbolt into the hole and then threading the provided mounting screws into place. Be sure to tighten the screws securely; otherwise, the new deadbolt may not function properly.

4. Lastly, test the new deadbolt by locking and unlocking it with your house keys. Once you’re satisfied that everything is working properly, you can rest assured knowing that your front door is now more secure than ever before.

Troubleshooting Common Problems With Locks

locks are an important part of our everyday lives, keeping our homes and belongings safe from intruders. However, they can sometimes malfunction, which can be frustrating and even dangerous.

If you’re having trouble with your locks, here are some common problems and how to fix them:

Jamming: This is often caused by dirt or debris getting caught in the mechanism. Try spraying a little WD-40 into the keyhole and working the key back and forth to clear the jam.

Key won’t turn: This could be due to a variety of factors, including a broken key, a misaligned lock, or rust build-up. If the key is broken, you’ll need to have it replaced.

If the lock is misaligned, try wiggling the key back and forth until it lines up properly. And if rust is causing the problem, you may need to lubricate the keyhole with WD-40 or another lubricant.

Sticky keys: Again, this is usually caused by dirt or debris buildup. Cleaning out the keyhole with WD-40 or a similar product should solve the problem.

Recommended Tools For Lock Installation

When it comes to installing locks, there are a few essential tools that you will need.

  • First, you will need a tape measure to ensure that the lock is the correct size for the door.
  • Second, you will need a drill to create holes for the screws.
  • Third, you will need a screwdriver to actually secure the lock in place.
  • Finally, you will need a level to make sure that the lock is installed perfectly straight.


Installing a new lock on your door is a relatively easy task that can be completed in just a few minutes. With this complete guide, you should now have all the information you need to install a new lock on your door. We hope you found this guide helpful and we wish you the best of luck with your new lock installation!

Locked out of your home or office? Don’t know how to do a lock installation?

Houston Locksmith Pros is here to help. We provide complete locksmith services, from lock installation to emergency lockout services. We’re always here to help, 24 hours a day, 7 days a week.

With our locksmith expertise, you can rest assured that any lock installation will be done quickly and correctly. We’ll have you back in your home or office in no time at all.

Call us now at (713) 396-5727 for immediate assistance!

Pin It on Pinterest

Share This